Filed under: Uncategorized | Tags: biology, cell, cell differentiation, embryonic development, science
There are about 210 types of human cells, e.g., nerve cells, muscle cells, skin cells, blood cells, etc. Wikipedia has a nice comprehensive listing of all the types of human cells.
What makes one cell type different from the other cell types? After all, each cell in the body has exactly the same genome (the entire DNA sequence). How do different cells grow to look so different and to perform such different functions? And how do they get to be that way, out of homogenous (single cell type) early embryonic cells that are produced by cell division of the zygote (the fertilized egg)?
The difference between cell types is in the pattern of gene expression, i.e., which genes are turned on and which genes are turned off. Genes that code for enzymes involved in detoxification are transribed in lver cells, but there is not need for them to be expressed in muscle cells or neurons. Genes that code for proteins that are involved in muscle contraction need not be transcribed in white blood cells. The patterns of gene expression are specific to cell types and are directly resposible for the differences between morphologies and functions of different cells.
How do different cell types decide which genes to turn on or off? This is the result of processes occuring during embryonic development.
The zygote (fertilized egg) appears to be a sphere. It may look homogenous, i.e., with no up and down, left or right. However, this is not so. The point of entry of the sperm cell into the egg may provide polarity for the cell in some organisms. In others, mother may deposit mRNAs or proteins in one particular part of the egg cell. In yet others, the immediate environment of the egg (e.g., the uterine lining, or the surface of the soil) may define polarity of the cell.
When the zygote divides, first into 2, then 4, 8, 16 and more cells, some of those daughter cells are on one pole (e.g., containing maternal chemicals) and the others on the other pole (e.g., not containing maternal chemicals). Presence of chemicals (or other influences) starts altering the decisions as to which genes will be turned on or off.
As some of the genes in some of the cells turn on, they may code for proteins that slowly diffuse through the developing early embryo. Low, medium and high concentrations of those chemicals are found in diferent areas of the embryo depending on the distance from the cell that produces that chemical.
Other cells respond to the concentration of that chemical by turning particular genes on or off (in a manner similar to the effects of steroid hormones acting via nuclear receptors, described last week). Thus the position (location) of a cell in the early embryo largely determines what cell type it will become in the end of the process of the embryonic development.
The process of altering the pattern of gene expression and thus becoming a cell of a particular type is called cell differentiation.
The zygote is a totipotent cell – its daughter cells can become any cell type. As the development proceeds, some of the cells become pluripotent – they can become many, but not all cell types. Later on, the specificity narrows down further and a particular stem cell can turn into only a very limited number of cell types, e.g., a few types of blood cells, but not bone or brain cells or anything else. That is why embryonic stem cell research is much more promising than the adult stem cell research.
The mechanism by which diffusible chemicals synthesized by one embryonic cell induces differentiation of other cells in the embryo is called induction. Turning genes on and off allows the cells to produce proteins that are neccessary for the changes in the way those cells look and function. For instance, development of the retina induces the development of the lens and cornea of the eye. The substance secreted by the developing retina can only diffuse a short distance and affect the neighboring cells, which become other parts of the eye.
During embryonic development, some cells migrate. For instance, cells of the neural crest migrate throughout the embryo and, depending on their new “neighborhood” differentiate into pigment cells, cells of the adrenal medula, etc.
Finally, many aspects of the embryo are shaped by programmed cell death – apoptosis. For instance, early on in development our hands look like paddles or flippers. But, the cells of our fingers induce the cell death of the cells between the fingers. Similarly, we initially develop more brain cells than we need. Those brain cells that establish connections with other nerve cells, muscles, or glands, survive. Other brain cells die.
Sometimes just parts of cells die off. For instance, many more synapses are formed than needed between neurons and other neurons, muscles and glands. Those synapses that are used remain and get stronger, the other synapses detach, and the axons shrivel and die. Which brain cells and which of their synapses survive depends on their activity. Those that are involved in correct processing of sensory information or in coordinated motor activity are retained. Thus, both sensory and motor aspects of the nervous system need to be practiced and tested early on. That is why embryos move, for instance – testing their motor coordination. That is why sensory deprivation in the early childhood is detrimental to the proper development of the child.
The details of embryonic development and mechanisms of cell differentiation differ between plants, fungi, protists, and various invertebrate and vertebrate animals. We will look at some examples of those, as well as some important developmental genes (e.g., homeotic genes) in future handouts/discussions, and will revisit the human development later in the course.
Read:
Audesirk, Audesirk and Byers, Biology, 8th edition., Chapter 40
Filed under: Uncategorized | Tags: biology, cell, cell-cell interactions, hormones, science
Cell-cell interactions
Cells do not exist in complete isolation. For a coordinated function of cells in a tissue, tissues in an organ, organs in a system and systems in the body, cells need to be able to communicate with each other. Each cell should be capable of sending chemical signals to other cells and of receiving chemical signals from oter cells, as well as signals (chemical or other) from its immediate environment.
Cell membrane is a double layer of molecules of fat. Some small chemical messengers are capable of passing through the membrane. Most ions and most molecules cannot pass through the membrane, thus the information between the inside and the outside of the cell is mediated by proteins embedded in the membrane.
Membrane proteins serve various functions. For instance, such proteins form tight junctions that serve to glue neighboring cells together and prevent passage of substances between the two cells. Other surface proteins are involved in cell-cell recognition, which is important for the immune response. Other membrane proteins serve functions in communication between the inside of the cell and the cell’s immediate environment.
How does a cell send a signal?
A cell can communicate signals to other cells in various ways. Autocrine signaling is a way for a cell to alter its own extracellular environment, which in turn affects the way the cell functions. The cell secretes chemicals outside of its membrane and the presence of those chemicals on the outside modifies the behavior of that same cell. This process is important for growth.
Paracrine signaling is a way for a cell to affect the behavior of neighboring cells by secreting chemicals into the common intercellular space. This is an important process during embryonic development.
Endocrine signaling utilizes hormones. A cell secretes chemicals into the bloodstream. Those chemicals affect the behavior of distant target cells. We will go into more details of autocrine, paracrine and endocrine signaling later on, when we tackle the human endocrine system.
Direct signaling is a transfer of ions or small molecules from one cell to its neighbor through pores in the membrane. Those pores are built out of membrane proteins and are called gap junctions. This is the fastest mode of cell-cell communication and is found in places where extremely fast and well-coordinated activity of cells in needed. An example of this process can be found in the heart. The muscle cells in the heart communicate with each other via gap junctions which allows all heart cells to contract almost simultaneously.
Finally, synaptic signaling is found in the nervous system. It is a highly specific and localized type of paracrine signalling between two nerve cells or between a nerve cell and a muscle cell. We will go into details of synaptic signaling when we cover the human nervous system.
How does a cell receive a signal?
Some small molecules are capable of entering the cell through the plasma membrane. Nitrous oxide is one example. Upon entering the cell, it activates an enzyme.
Some small hormones also enter the cell directly, by passing through the membrane. Examples are steroid hormones, thyroid hormones and melatonin. Once inside the cell, they bind cytoplasmic or nuclear receptors. The hormone-receptors complex enters the nucleus and binds to a particular sequence on the DNA. Binding dislodges a protein that inhibits the expression of the gene at that segment, so the gene begins to be transcribed and translated. Thus, a new protein appears in the cell and assumes its normal function within it (or gets secreted). The action of nuclear receptors is slow, as it takes some hours for the whole process to occur. The effect is long-lasting (or even permanent) and changes the properties of the cell. This type of process is important in development, differentiation and maturation of cells, e.g., gametes (eggs and sperm cells).
There are three types of cell surface receptors: membrane enzymes, ion channels, and transmembrane receptors.
When a signaling chemical binds to the membrane enzyme protein on the outside of the cell, this triggers a change in the 3D conformation of that protein, which, in turn, triggers a chemical reaction on the inside of the cell.
When a signaling molecule binds to an ion channel on the outside of the cell, this triggers the change of the 3D conformation of the protein and the channel opens, allowing the ions to move in or out of the cell following their electrical gradients and thus altering the polarization of the cell membrane. Some ion channels respond to non-chemical stimuli in the same way, including changes in electrical charge or mechanical disturbance of the membrane.
G protein-linked receptors are seven-pass transmembrane proteins. This means that the polypeptide chain traverses the membrane seven times. When a chemical – a hormone or a pharmaceutical agent – binds to the receptor on the outside of the cell, this triggers a series of chemical reactions, including the movement and binding of the G-protein, transformation of GTP into GDP and activation of second messengers. Second messengers (e.g., cyclic AMP) start a cascade of enzymatic reactions leading to the cellular response. This signaling method is quite fast and, more importantly, it amplifies the signal. Binding of a single hormone molecule quickly results in thousands of molecules of second messengers acting on even more molecules of enzymes and so on. Thus, the response to a small stimulus can be very large. We will go into details of G-protein-mediated signaling when we tackle the endocrine and the sensory systems.
References:
Audesirk, Audesirk and Byers, Biology, 8th edition., Chapter 5
Filed under: Uncategorized | Tags: biology, cell, DNA, protein, RNA, science, transcription, translation
The DNA code
DNA is a long double-stranded molecule residing inside the nucleus of every cell. It is usually tightly coiled forming chromosomes in which it is protected by proteins.
Each of the two strands of the DNA molecule is a chain of smaller molecules. Each link in the chain is composed of one sugar molecule, one phosphate molecule and one nucleotide molecule. There are four types of nucleotides (or ‘bases’) in the DNA: adenine (A), thymine (T), guanine (G) and cytosine (C). The two strands of DNA are structured in such a way that an adenine on one strand is always attached to a thymine on the other strand, and the guanine of one strand is always bound to cytosine on the other strand. Thus, the two strands of the DNA molecule are mirror-images of each other.
The exact sequence of nucleotides on a DNA strand is the genetic code. The total genetic code of all of the DNA on all the chromosomes is the genome. Each cell in the body has exactly the same chromosomes and exactly the same genome (with some exceptions we will cover later).
A gene is a small portion of the genome – a sequence of nucleotides that is expressed together and codes for a single protein (polypeptide) molecule.
Cell uses the genes to synthetise proteins. This is a two-step process. The first step is transcription in which the sequence of one gene is replicated in an RNA molecule. The second step is translation in which the RNA molecule serves as a code for the formation of an amino-acid chain (a polypeptide).
Transcription
For a gene to be expressed, i.e., translated into RNA, that portion of the DNA has to be uncoiled and freed of the protective proteins. An enzyme, called DNA polymerase, reads the DNA code (the sequence of bases on one of the two strands of the DNA molecule) and builds a single-stranded chain of the RNA molecule. Again, where there is a G in DNA, there will be C in the RNA and vice versa. Instead of thymine, RNA has uracil (U). Wherever in the DNA strand there is an A, there will be a U in the RNA, and wherever there is a T on the DNA molecule, there will be an A in the RNA.
Once the whole gene (100s to 10,000s of bases in a row) is transcribed, the RNA molecule detaches. The RNA (called messenger RNA or mRNA) may be further modified by addition of more A bases at its tail, by addition of other small molecules to some of the nucleotides and by excision of some portions (introns) out of the chain. The removal of introns (the non-coding regions) and putting together the remaining segments – exons – into a single chain again, is called RNA splicing. RNA splicing allows for one gene to code for multiple related kinds of proteins, as alternative patterns of splicing may be controlled by various factors in the cell.
Unlike DNA, the mRNA molecule is capable of exiting the nucleus through the pores in the nuclear membrane. It enters the endoplasmatic reticulum and attaches itself to one of the membranes in the rough ER.
Translation
Three types of RNA are involved in the translation process: mRNA which carries the code for the gene, rRNA which aids in the formation of the ribosome, and tRNA which brings individual amino-acids to the ribosome. Translation is controlled by various enzymes that recognize specific nucleotide sequences.
The genetic code (nucleotide sequence of a gene) translates into a polypeptide (amino-acid sequence of a protein) in a 3-to-1 fashion. Three nuclotides in a row code for one amino-acid. There are a total of 20 amino-acids used to build all proteins in our bodies. Some amino-acids are coded by a single triplet code, or codon. Other amino-acids may be coded by several different RNA sequences. There is also a START sequence (coding for fMet) and a STOP sequence that does not code for any amino-acid. The genetic code is (almost) universal. Except for a few microorganisms, all of life uses the same genetic code.
When the ribosome is assembled around a molecule of mRNA, the translation begins with the reading of the first triplet. Small tRNA molecules bring in the individual amino-acids and attach them to the mRNA, as well as to each other, forming a chain of amino-acids. When a stop signal is reached, the entire complex disassociates. The ribosome, the mRNA, the tRNAs and the enzymes are then either degraded or re-used for another translational event.
Protein synthesis – post-translational modifications
Translation of the DNA/RNA code into a sequence of amino-acids is just the beginning of the process of protein synthesis.
The exact sequence of amino-acids in a polypeptide chain is the primary structure of the protein.
As different amino-acids are molecules of somewhat different shapes, sizes and electrical polarities, they react with each other. The attractive and repulsive forces between amino-acids cause the chain to fold in various ways. The three-dimensional shape of the polypeptide chain due to the chemical properties of its component amino-acids is called the secondary structure of the protein.
Enzymes called chaperonins further modify the three-dimensional structure of the protein by folding it in particular ways. The 3D structure of a protein is its most important property as the functionality of a protein depends on its shape – it can react with other molecules only if the two molecules fit into each other like a key and a lock. The 3D structure of the fully folded protein is its tertiary structure.
Prions, the causes of such diseases as Mad Cow Disease, Scabies and Kreutzfeld-Jacob disease, are proteins. The primary and secondary structure of the prion is almost identical to the normally expressed proteins in our brain cells, but the tertiary structure is different – they are folded into different shapes. When a prion enters a healthy brain cell, it is capable of denaturing (unwinding) the native protein and then reshaping it in the same shape as the prion. Thus one prion molecule makes two – those two go on and make four, those four make eight, and so on, until the whole brain is just one liquifiied spongy mass.
Another aspect of the tertiary structure of the protein is addition of small molecules to the chain. For instance, phosphate groups may be attached to the protein (giving it additional energy). Also, short chains of sugars are usually bound to the tail-end of the protein. These sugar chains serve as “ZIP-code tags” for the protein, informing carrier molecules exactly where in the cell this protein needs to be carried to (usually within vesicles that bud off the RER or the Golgi apparatus). The elements of the cytoskeleton are used as conduits (“elevators and escalators”) to shuttle proteins to where in the cell they are needed.
Many proteins are composed of more than one polypeptide chain. For instance, hemoglobin is formed by binding together four subunits. Each subunit also has a heme molecule attached to it, and an ion of iron attached to the heme (this iron is where oxygen binds to hemogolobin). This larger, more complex structure of the protein is its quaternary structure.
See animations:
Transcription
Translation
Watch videos:
DNA Structure
DNA Transcription
References:
Audesirk, Audesirk and Byers, Biology, 8th edition., Chapters 9 and 10.
NCWC-BIO101 